GSO ISO 1977:2015
Gulf Standard
Current Edition
·
Approved on
03 September 2015
·
Conveyor chains, attachments and sprockets
GSO ISO 1977:2015 Files
English
13 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ISO 1977:2015 Scope
This International Standard specifies the characteristics of bush, plain and flanged roller chains of both solid and hollow bearing pin types designed for general conveying and mechanical handling duties, together with associated chain sprockets and attachments. The chain dimensions specified in this International Standard will ensure interchangeability of complete chains and individual links for repair purposes.
This International Standard is applicable to sprockets with from 6 to 40 teeth. Control criteria for sprockets are defined to ensure correct meshing, operation and transmission of load in use under normal operating conditions.
NOTE Controls do not necessarily determine sprocket design parameters.
Specifications are also given for K attachments and deep plates for use with the conveyor chains conforming to this International Standard.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
GSO 1421:2002
Gulf Technical Regulation
Hollow blocks made from clay for walls
Recently Published from Construction and Building Sector
GSO ASTM E2129:2024
ASTM E2129:18
Gulf Standard
Standard Practice for Data Collection for Sustainability Assessment of Building Products
GSO EN 196-3:2024
EN 196-3:2016
Gulf Standard
Methods of testing cement - Part 3: Determination of setting times and soundness
GSO ISO 10563:2024
ISO 10563:2023
Gulf Standard
Building and civil engineering sealants — Determination of change in mass and volume
GSO EN 933-2:2024
EN 933-2:2020
Gulf Standard
Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures